|
| |
|
| |
|
|
GRAFIX® CRUCIATE RECONSTRUCTION
The GraFix® Cruciate Reconstruction
System is designed to facilitate arthroscopic anterior
cruciate ligament reconstructions. Using the Linvatec
Pinn-ACL® Cruciate Guide and Bullseye® Femoral
Guide, this system enables the surgeon to accomplish
precise, reproducible guide pin and subsequent tunnel
placement. The 2-Pin Passer allows for parallel interference
screw placement alongside the graft without divergence.
Linvatec interference screws are available in the
most complete variety of sizes, materials and configurations
to accommodate all preferences.
Pinn-ACL® Cruciate Guide System
Bullseye® Guides
Preparation Table
Modular Drive System
PCL Instrumentation
|
|
| 
|
Pinn-ACL® Guide
The Pinn-ACL Guide can be used to create tibial tunnels
of known lengths with a variable angle adjustment of 35 to
60 degrees with the use of a graduated pin-sleeve.
- Tibial guide features a patented collet locking mechanism for precise,
fingertip control of pin-sleeve placement.
-
The guides' pin-sleeves are graduated to precisely
determine tunnel length prior to drilling.
-
Femoral guides are offered in right and left versions
and are designed to easily accommodate unusually
large or small knees.
Catalog # |
Description |
| 8731 |
Pinn-ACL Tibial Guide (includes ACL guide arm and pin-sleeve) | | 8205 |
Pinn-ACL Femoral Guide, right | | 8206 |
Pinn-ACL Femoral Guide, left | | 8207 |
Femoral Guide Introducer |
|
|
| |
|
|
|
Bullseye® Femoral Tunnel Preperation
Simplifies isometry verification using anatomical landmarks in
5mm to 8mm sizes.
Catalog # |
Description |
| C8650 |
5mm Femoral Guide (requires 9744 guide pin) | | C8660 |
6mm Femoral Guide (requires 9744 guide pin) | | C8670 |
7mm Femoral Guide (requires 9744 guide pin) | | 8680A |
8mm Femoral Guide (requires 9744 guide pin) |
|
|
| |
|
|
|
Preparation Table
This fully modular system plays a key role during ACL and
PCL reconstructive surgeries to prepare soft tissue
and bone-tendon bone autografts or allografts.
The system allows the surgeon to interchange the various
components to clean, whipstitch, measure, pre-tension
or add a fixation device.
- This working platform incorporates a sizing block, sold
separately, that is removable for cleaning or sizing
a graft under pre-tensioning. The sizing block can
accommodate grafts from 3.0mm to 13mm in .5mm increments.
- The universal Slide Locks allow for any of the graft preparation
table components to be changed intraoperatively, easily
and quickly. The Slide Locks are also fully adjustable
via the spring loaded locking button, for one handed
adjustments.
- The Tension Clamp is etched in both pounds ( 30 lbs. max.
) and newtons ( 120 N max ) for quick referencing during pre-tensioning
of the graft for those surgeons who feel it is necessary
for satisfactory post-op results.The Graft Clamps
are designed to act as an extra set of hands and incorporate
atraumatic teeth to prevent damage to the graft
Catalog # |
Description |
| PS8820 |
Graft Preparation Table | | PS8821 |
Slide Lock (2 recommended) | | PS8822 |
Soft Tissue Graft Clamp | | PS8823 |
Suture Holder Clamp | | PS8824 |
Tension Clamp | | PS8825 |
Endobutton Holder | | PS8826 |
Bone-Tendon-Bone Clamp | | PS8829 |
Bone Block Drill Guide | | PS8830 |
Scraping Board | | PS8832 |
Sizing Block | | PS8834 |
XO Button™ Holder |
|
|
Return
to Top
| |
|
|
 |
Concept Modular Drive System
The modular system provides the necessary tools to insert
or remove Linvatec bioabsorbable or metal interference
screws during ACL and PCL reconstruction. The handle
and attachable shafts provide a cost effective alternative
to expensive drivers and other necessary instruments.
- Large, ergonomic ratcheting handle for simple screw insertion and
removal.
-
Quick connect makes intraoperative shaft changing
easy and quick.
- Thin and regular shaft diameters can accomodate all tunnel sizes,
screw placements and entry approaches.
Catalog # |
Description |
| D8640 |
Ratcheting Handle | | D8626 |
3.5mm Straight Hex | | D8627 |
3.5mm Thin Shaft Hex | | C8716 |
Tri-Lobe Straight (for use with all Bioscrew® interference screws) | | D8635 |
EZ-In | | D8636 |
EZ-Out | | D8637 |
7mm Tap | | D8638 |
8mm Tap | | D8607 |
7.3mm Matryx® Screw Tap |
|
|
| |
|
|
| 
|
PCL Instrumentation
The PCL Guide Pin:
- Allows advancement with a proactive stop to prevent drilling beyond
the tibia and into neurovascular structures.
Catalog # |
Description |
| C8732 |
PCL Guide Arm (for use with 8731) | | C8728 |
PCL Pin-Sleeve | | C8729 |
PCL Guide Pin, etched (5 per box) | | C8734 |
Tunnel Rasp, fine, 9mm | | C8736 |
PCL Rasp | | C8737 |
PCL Curette |
|
|
|
|
|
