Inflow/Outflow Cannula

• Fenestrations
• Stopcock
• Combination 1⁄4” (6.4mm) barb and Luer connector
• Includes conical Obturator

Replacement Parts for C7198

Replacement Parts for C7199

Outflow Cannula

• Fenestrations

For a complete set-order: Cannula, Trocar and Obturator.

5.2mm O.D. x 3.5” (89mm) Length

5.2mm O.D. x 5.0” (127mm) Length

Pressure Sensing Cannula System

For use with the Apex® Two-Connection tubing set and 87k Fluid Control System. This system allows for true intra-articular pressure measurement.

• Dual cannulation to provide separate fluid inflow and pressure measurement
• Outer cannula is removable for patient entry and cleaning
• Blunt tip on outer cannula to reduce the potential for articular tissue damage
• 5.5mm O.D. x 100mm working length
• Fenestrations
• Combination 1⁄4” (6.4mm) barb and Luer connector
• Includes conical obturator

Replacement Parts

Pressure Sensing Cannula System

For use with the 87k Fluid Control System and Apex Two-Connection tubing set. This system allows for true intra-articular pressure measurement.

• Dual cannulation to provide separate fluid inflow and pressure measurement
• Outer cannula is removable for patient entry and cleaning
• Fenestrations

For a complete set-order: Inner Cannula, Outer Cannula, Trocar, Obturator, and Inflow Adapter.

*Inflow Adapter for 5.1mm O.D. cannula system (converts to Luer)
**Inflow Adapter for 6.3mm O.D. cannula system (converts to Luer).

Micro Cannula Set

Set includes: Sheath, obturator, trocar, Luer cap, seals (5 sets; 2 seals per set)

• Shaver connection: Sterling^® micro shavers
• Inflow/outflow portal: Luer lock connector
• Working length: 45mm
• Weight: 20gm
• Cannula material: Titanium
• Seal material: Silicone — latex free

Accessories

Replacement Parts

Note: Bridge adapters fit all Linvatec micro cannulas.
Note: Trocars and obturators are interchangeable between threaded and smooth cannulas within the same size; i.e., 3.0mm sheath and 3.0mm trocar and obturator.

Universal Cannula Set

• 70mm working length
• 5.5mm I.D.
• Non-conductive material for electrosurgical procedures
• Connector allows positive connection to some Linvatec blades and burs
• Integral, latex free, double seal prevents backwash of fluids
• Sharp and blunt trocars included
• Packaged sterile, single-use, ten per box

Clear Flexible Cannula

The Clear Flexible Cannula is the clearest in the Linvatec family. It’s flexibility and see-through design enable the surgeon to use larger instruments and curved blades, as well as making it easier to tie knots. Unlike most cannulas, the Clear Flexible Cannula is remarkably clear, flexible and abrasion resistant. Concerns of debris and skiving are reduced with the cannula’s ability to pass instruments that would normally require a larger passageway. Even though the inside diameter is only 6.5mm, the Clear Flexible Cannula will accommodate a 4mm suture punch, a Spectrum^® corkscrew, or a curved shaver blade without skiving. The Clear Flexible Cannula’s 73mm working length will accommodate most instrumentation.
So go ahead... be flexible.

Characteristics:

• Flexible body
• See-through design
• Abrasion resistant
• Inflow/outflow stopcock
• Passageway seal
• Latex free
• Disposable Conical Obturator included
• Packaged sterile, single-use, six per box

Compatible with:

• Most shaver blades, straight or curved
• Small joint shaver blades, straight or curved with MC1000 adapter
• Reusable Cannulated Obturator - Cat. No. C7335
• Scope bridges
• Most manual instruments