Onco-LIFE^™ Autofluorescence System

The Onco-LIFE^™ system consists of an endoscopic light source and video camera for use with conventional endoscopes. Onco-LIFE^™ operates in two imaging modes: conventional white light imaging mode (also referred to as color imaging mode) and fluorescence imaging mode. In the white light mode, Onco-LIFE^™ functions in the same way as currently marketed conventional endoscopic light sources and cameras.

In the fluorescence mode, Onco-LIFE^™ images native tissue fluorescence to aid in the identification of potentially precancerous and cancerous tissue. Blue light is used to illuminate the tissue and excite fluorophors naturally present in the tissue. A real-time video image of the fluorescing tissue is acquired and displayed on the video monitor. Areas suspicious for disease are displayed in red in the video image.

FEATURES

Toggle between fluorescence and white light imaging modes selectable at the press of a button

Clear, bright, real-time fluorescence images to help improve visibility of margins

Numeric display of red/green color ratio to help improve detection of subtle color changes and shadows

Automatic control of image brightness in both imaging modes to simplify system use

Compact, multi-mode camera to help reduce arm fatigue

Light source and camera controller fit onto standard endoscopy cart

Bright, easy to maintain arc lamp in light source to help reduce off-line time

Compatible with major brands of flexible fiberoptic endoscopes

Over 200 clinical references and articles published on Xillix LIFE™ technology

CAMERA CONTROLLER SPECIFICATIONS

Video Output Standard - NTSC

Video Outputs - 2x RGBS component video, 1x S-Video, 1x Composite video

Image Management System Remote Control Output - 1x Contact closure

Power Consumption - 35VA

Dimensions - 16.9” X 11.8” X 5.3”

Weight - 12.1 lbs

LIGHT SOURCE SPECIFICATIONS

Main Power Supply - 100-240 VAC; 50/60Hz

Operating Environment - Temperature: 50F to 104F, Relative Humidity: 30-85%, Pressure: 70 – 106 kPa

Lamp Type - Main: 150W Super-high pressure mercury arc, Backup: 35 W Halogen

Visible Spectrum - WL Mode: Full visible spectrum, FL Mode: Partial (suppressed green) spectrum

Power Consumption - 250 VA

Dimensions - 16.9” X 11.8” X 5.3”

Weight - 23 lbs

CAMERA SPECIFICATIONS

Color Image Sensor - ½” Color CCD

Low Light Image Sensor - ICCD

Video Standard - NTSC

Degree of Protection Against Ingress of Moisture - Protected against immersion in liquids

Dimensions - 3.7” X 2.3” X 2.3”

Weight - 10.6 oz